Articles

Activity monitoring Accesses HowTo's/Configuration Reporting

• Active Directory Connector is Not Visible on Exinda after Disabling TLS 1.0

  Overview The communication between Exinda and the Active Directory Connector fails with the following error: [add.WARNING]: SOAP 1.1 fault: SOAP-ENV:Server [no subcode]#012EOF was observed that violat...

• Reset Password when Exinda Password is Forgotten

  Overview If the user has forgotten the password on their Exinda they can perform the following steps to reset the password. This process will remove the password entirely from the 'admin' account. Sol...

• Creating/Editing Schedules in the Exinda WebUI

  Overview This article provides the steps required for you to set up the Schedule on the Exinda WebUI, this allows you to define policies based on different schedules. Prerequisites Admin access to the...

• Creating a Block or Ignore Policy for Sites

  Overview Whether to discard (block) traffic to unwanted sites or to ignore traffic that should not be shaped, both can be done with Exinda as long as the traffic is known (by IP or by application). Th...

• Asymmetric Route Detection Meaning

  SummaryThe Asymmetric Route Detected alert shows when the Exinda detects that it is only receiving part of the communication path between hosts. For shaping, this is harmless, but for acceleration and...

• Start | Stop | Restart - Optimizer

  Overview This article provides the steps required for you to start, stop and restart the Optimizer, this is useful for when there are any changes on the Circuit, the Policies, or any change in the app...

• Performing a Factory Reset on Exinda

  Overview This article describes the process of performing a Factory Reset on Exinda. Process To perform a Factory Reset from the Web UI, follow these steps: Navigate to Configuration > System > Mainte...

• Force Time Sync Using an NTP Server

  Overview In some cases, it is necessary to force Exinda's time system to match an NTP server's time. This article provides the command to force time sync between servers via an NTP (Network Time Proto...

• Exinda Platform Throughput Limit

  Overview This article provides relevant information on the throughput limit in Exinda platforms for you to keep in mind when configuring bandwidth management, policy routing, setting limit per host, o...

• Exinda Default Username and Password

  Overview This article provides the default username and password for Exinda appliances. Information Default Exinda credentials: Username: adminPassword: exinda Default 'monitor' user credentials: User...