Articles

Issue/Error Messages, Reference and/or NonAdmin HowTo's about: CLI Applications Backup Database Network Optimization

• Enabling WCCP on the Exinda Appliance

  Overview An Exinda appliance can accelerate traffic routed using the WCCP v2. You can use this topology when you want application acceleration, but do not wish to install the Exinda appliance inline. ...

• Running the CLI Jumpstart Wizard

  Overview   When you log in to the CLI (Command Line Interface) for the first time, you are presented with the option to run the CLI Jumpstart wizard. This is a guided wizard that helps with the initia...

• Accessing the CLI EXEC and Config modes through the Web UI

  Overview The Serial Console Interface is a tool that facilitates the connection to the appliance's Command Line Interface (CLI) from the Web UI, and allows accessing the EXEC and configuration modes. ...

• NIC Settings

  Overview   This article provides information regarding the NIC (Network Interface Card) settings page, which is used to set the following: Speed, duplex, and MTU of the system NICs. The behavior of th...

• Traffic Shaping Queue Modes

  Overview   Every Exinda appliance needs to maintain a queue of packets for each policy within their respective virtual circuits when shaping traffic as specified by the policies. This article describe...

• Exinda CLI: Web UI and Web Proxy

  Overview   This article provides information regarding the Exinda CLI command web. You can use the web command to configure the web user interface (Web UI).   Information   NOTE:  The following syntax...

• Exinda CLI: Other Commands

  Information   This article provides information regarding the Exinda CLI other commands that may be helpful.   NOTE:  The following syntax convention is used: {}: Options are enclosed in braces and ar...

• Exinda CLI: WCCP

  Overview   This article provides information regarding the Exinda CLI command wccp. You can use the wccp command to configure WCCP (Web Cache Communication Protocol) on the appliance. WCCP allows for ...

• Exinda CLI: Enabling Virtualization in the CLI

  Overview   This article provides information regarding the Exinda CLI command virt which is used for creating or editing virtual machines.   Information   NOTE:  The following syntax convention is use...

• Exinda CLI: Storage

  Overview   This article provides information on the Exinda CLI command storage which is used to manage the disk storage used by system services.   Information   NOTE:  The following syntax convention ...