Articles

Issue/Error Messages, Reference and/or NonAdmin HowTo's about: CLI Applications Backup Database Network Optimization

• Configuring an Exinda Appliance for VRRP With PBR Using CLI

  Overview To use the Virtual Router Redundancy Protocol (VRRP) with Policy-Based Routing (PBR), the interfaces on the Exinda appliance must be configured with the appropriate settings, using the Exinda...

• Configuring an Exinda Appliance for VRRP With PBR Using Exinda Web UI

  Overview To use VRRP (Virtual Router Redundancy Protocol) with PBR (Policy-Based Routing), the interfaces on the Exinda appliance must be configured with the appropriate settings, using the Exinda web...

• Configuring a Router for VRRP With PBR

  Overview To use the Virtual Router Redundancy Protocol (VRRP) with PBR (Policy-Based Routing), you should specify the behavior of the router interfaces that connect to the LAN, WAN, and the out-of-pat...

• Virtual Router Redundancy Protocol With Policy-Based Routing

  Overview The VRRP provides an automatic assignment of IP routers, using virtual routers as proxies for physical routers. An IP address acts as a gateway between the router and the Exinda appliances. T...

• Configuring a Router for Policy-Based Routing With Two Subnets

  Overview To use PBR, you should specify the behavior of the router interfaces connecting to the LAN, the WAN, and the out-of-path Exinda appliances. This article explains how to configure a router con...

• Configuring a Router for a Basic Policy-Based Routing Topology

  Overview While deploying your Exinda Appliance in a basic PBR topology, you must specify how the router should handle the traffic coming from the out-of-path Exinda Appliance, the WAN, and the LAN. Th...

• Configuring an Exinda Appliance for Policy-Based Routing Using Exinda Web UI

  Overview To use PBR, you should configure the interfaces on the Exinda appliance with the appropriate settings, using either the Exinda web UI or the CLI. This article provides step-by-step instructio...

• Policy-Based Routing With Two Subnets for Failover and Redundancy

  Overview You can deploy PBR on two subnets serviced by their own Exinda appliances. The configuration detailed below re-routes the traffic from one Exinda appliance to another in case of hardware fail...

• Configuring an Exinda Appliance for Policy-Based Routing Using CLI

  Overview To use PBR, you should configure the interfaces on the Exinda appliance with the appropriate settings, using either the Exinda web UI or the CLI. This article provides step-by-step instructio...

• Directing Traffic With Policy-Based Routing

  Overview Using PBR, you can deploy your Exinda appliance in the network out-of-path but retain the in-path optimization capabilities. To achieve this, you should configure the router with the policy t...