Articles

Issue/Error Messages, Reference and/or NonAdmin HowTo's about: CLI Applications Backup Database Network Optimization

• Exinda CLI: IPv6

  Overview   This article provides information regarding the Exinda CLI command ipv6 which is used for configuring IPv6 specific settings.   Information   NOTE:  The following syntax convention is used:...

• Exinda CLI: IP

  Overview   This article provides information regarding the Exinda CLI command ip which is used to configure IP network settings.   Information   NOTE:  The following syntax convention is used: {}: Opt...

• Exinda CLI: Service

  Overview   This article provides information regarding the Exinda CLI Command service which is used for managing Application Acceleration modules.   Information   NOTE:  The following syntax conventio...

• Exinda CLI: Mirror

  Information   This article provides information regarding the Exinda CLI command mirror, which is used to assign an interface to act as a mirror port. Mirror ports are typically used in clustered envi...

• Exinda CLI : Bridge

  Overview   You can use the bridge command to enable or disable bridges within the application. The interfaces available for a bridge are determined by the appliance model and installed expansion cards...

• Exinda Configuration for Link Aggregation

  Overview Link aggregation technologies (LACP, EtherChannel, PAgP, NIC teaming, etc) based on the 802.3ad protocol, allow for multiple individual bandwidth links to be logically combined into a single ...

• Bridge Direction Alert 'Bridge may be connected incorrectly'

  Overview Bridge Direction alert 'Bridge may be connected incorrectly' is an alert that is triggered when the number of packages passing the bridge and intended for the internal subnet, is bigger on th...

• Validating default Layer 7 signature - Exinda

  Overview This article provides the steps required for you to validate if Exinda provides a predefined Layer 7 signature when Creating an Application Object which defines traffic by combinations of one...

• Editing a Policy on the Exinda WebUI

  Overview This article provides the steps for you to Edit an existing Policy using the Exinda UI system, this can be useful if there is a change or you need to adjust a current policy according to your...

• Exinda WebUI "Your session is no longer valid" Error Message Due to Disabled Web Processes

  Overview While trying to access Exinda WebUI, you are not able to log in with Your session is no longer valid error. You have tried to reset the browser and tried to login from multiple systems and de...