Articles

MS Readiness Assessment

• /var causing system disk full alerts due to /var/opt/tms/stats growing large

  OverviewThere are many reasons for the /var partition to become full, this article is specifically due to /var/opt/tms/stats directly containing files which are using up a large percentage of the maxi...

• Error 'This page can't be displayed' After Upgrading the Firmware

  Overview After upgrading the Exinda's firmware, the user may find that the web UI is inaccessible, showing the browser's generic error message: 'This page can't be displayed' Checking the Exinda's log...

• Stopping and Restarting Optimizer with 'Monitor' Level Role

  Overview In the Exinda firmware, different users have different privilege levels. A 'monitor' privilege level allows for a user to look at monitoring and reporting, but only have read-only access to t...

• 'Exinda Recommends' Pop-Up for Auto Catch-All Traffic While Optimizer Is Off

  Overview On the Dashboard in ExOS version 7 and higher, a blue pop-up box called 'Exinda Recommends' gets triggered. This box contains recommendations about creating policies for traffic, Virtual Circ...

• Error: 'failed to keep watchdog alive' During NIC Flapping

  Overview The error 'failed to keep watchdog alive' occurs in the logs, accompanying a NIC (network interface controller) flap or another outage in the system. An Exinda keeps a detailed log to determi...

• Error: 'Edge Cache will be disabled until DNS becomes available' After Upgrading

  Overview After upgrading, DNS settings in Configuration > System > Network > DNS may be lost. This will cause the Edge Cache to become disabled. The DNS settings will need to be re-entered for Edge Ca...