Articles

MS Readiness Assessment

• All Acceleration (TCP and Edge-Cache) Settings Enabled but Still Reduction Is 0%

  Overview Users have configured all settings for accelerating traffic. TCP Acceleration: Community is online. Both Exindas can see each other in the community. Wan Memory peers are online. The manageme...

• After Upgrading to Version 7.4.4 Exinda Stuck in BIOS

  Overview During the first time reboot after installing the image of 7.4.4 the device is stuck in BIOS. This article explains the phenomenon observed when upgrading the Exinda appliances 8063/1063/1206...

• After 7.0.2, RADIUS users configured with “monitor” permissions cannot log into the mgmt. interfaces.

  OverviewCustomer configured admin users on his RADIUS server has normal access to the Exinda but with regards to his monitor users, they can't login to the unit form any site. CauseWhen user can initi...

• Adding an Application to an Application Group

  Overview Though Exinda comes with default application groups based on default application signatures in each release of the Exinda firmware, it is possible to add applications of your own to applicati...

• Adding a Range of Port Ending at 65535 Crashes the Exinda

  SummaryWhen adding a new application to the Exinda by TCP or UDP port range, and having an ending value of Port 65535, the Exinda will crash upon attempting to add it. OverviewAdding an application by...

• Adaptive Response granularity to be fixed from 5 minute to live granularity.

  OverviewThe current granularity for an Adaptive Response to be triggered is 5 minutes. During that time, on a higher speed link, literally GigaÕs of data can be downloaded. This causes a problem with ...

• AD Groups Not Being Inherited From Child Domain

  SummaryWhen dealing with parent/child domain relationships local/global group objects are not automatically inherited from the child to the parent domain OverviewFor some reason in Active Directory a ...

• AD Connector Crashes with Error "The server does not support the control. The control is critical."

  SummaryWhen using the AD Connector for the Exinda, it is possible to see repeated crashes of the AD Connector Service on the Windows Server with the log error The server does not support the control. ...

• Active Hosts in DVCs accumulate until reboot

  SummaryIn some scenarios, it can be seen that the number of active hosts in a DVC will increment and will never return to zero, even if there is no one using the network at the time. OverviewIn v7.4 a...

• Active Directory usernames not mapping to IP addresses

  OverviewAfter setting up the AD connector to show the usernames of the users which are using hosts on the network, there may be missing configuration which causes usernames to not map with their IP ad...