Articles

MS Readiness Assessment

• Control SNMP Access to the Exinda

  Overview Exinda SNMP (Simple Network Management Protocol) alerts are sent from the management interface/IP of the Exinda. If an admin wants to restrict only certain hosts to be able to access the SNMP...

• Email Configured on Exinda but Unable to Receive Any Emails

  Overview Exinda has the option to configure email so that users can receive alerts/reports from the Exinda as an email. If after configuring emails on the Exinda, users don't receive any emails and se...

• Configuration Files Contains Bridges & Interfaces That Do Not Exist In Hardware

  SummaryIf importing configuration between devices, it is possible to see 'ghost' interfaces and bridges - those that do not actively exist in the current hardware setup. OverviewWhen migrating or impo...

• Communication broken when Acceleration is enabled in an asymmetric cluster

  SummaryThis issue is caused by how the cluster pairs communicate with one another and is resolved by a firmware upgrade Overview This issue occurs when the SYN and SYN-ACK packets follow asymmetric pa...

• Cluster-databases different sizes

  OverviewExinda in a cluster will not necessarily have the same size database. This means the monitor partitions will not be the same size. Each device has its own database, and they are sending each o...

• CLI CSR Process Brief Explaination

  TitleCLI CSR Process Brief Explaination Article Number000012263 Article TypeInternal_Process__kav Version Number1 Publication StatusOnline ContentThe current process for Exinda to generate a certifica...

• Clearing NIC Tx/Rx Statistics

  SummaryWhen viewing NIC diagnostics under the 'System > Network, NICs page or the System > Diagnostics, NICs page, there will be an interface level set of diagnostics run on the interface. It is diffi...

• Clearing a SSH Saved Host Key From the Exinda

  SummaryWhen using SSH in any capacity (whether it's Secure Copy or attempting to SSH to or from the Exinda), it is required that the Exinda and the other client negotiate encryption based on Host Keys...

• Check what port numbers are configured for HTTP and HTTPS access

  SummaryIn cases where the port number configured for HTTP or HTTPS is unknown, it is possible to find those port numbers from a console session with the Exinda. OverviewIn cases where the port number ...

• Check For Update" Link Doesn't Find Any Updates on v6.4.7

  SummaryWhen using v6.4.7, when clicking on the Check for Updates link located on the Firmware Install page, it does not show that there are any updates to the firmware. OverviewOn the Configuration > ...