Overview
Exinda 7.5.6 is a release with significant application database updates and maintenance fixes.
This article provides the files required to download the Exinda Network Orchestrator 7.5.6 and it provides the supporting information about this firmware version as well as the summary of the changes.
- Release date: June 18, 2024
- Build ID: 0053
Information
Software Update
You can download the ExOS v7.5.6 firmware using one of the options here:
- exinda-v7.5.6-0053-x86_64.img (MD5 504ce5a5ebbe401313f95e0c6ad8f533, size 706,989,058 bytes)
- exinda-v7.5.6-0053-x86_64.iso (MD5 afa597337d7cec987ce93acaee4cdba2, size 876,609,536 bytes)
- exinda-v7.5.6-0053-x86_64.zip (MD5 339c339345fa4a67edada7724603ba36, size 724,237,200 bytes)
Note:If you click on the ExOS v7.5.6 and the download does not begin automatically, right-click on the link and select Copy Link Address:
then open a new browser tab, paste the link into the address line, and press Enter.
Supported upgrade versions
- 7.0.0, 7.0.1, 7.0.1u1, 7.0.2, 7.0.2u1, 7.0.3, 7.0.3u1 and 7.4.1, 7.4.2, 7.4.3, 7.4.4, 7.4.4u1, 7.4.4u2, 7.4.5, 7.4.6, 7.4.7, 7.4.8, 7.4.9, 7.4.10, 7.4.11, 7.4.12, 7.4.13, 7.5.0, 7.5.1, 7.5.2, 7.5.3, 7.5.4, 7.5.5
- 6.4.6, 6.4.7
Supported Platforms
- 3062, 4062, 4065, 8063, 8064, 8065,10063, 10064, 12063, 12064, and all Virtual Appliances
Upgrade Path
- Upgrading from a previous 7.* version is a direct update to 7.5.6.
- Upgrading from a version prior to 6.4.3:
- Upgrade from appliance version to 6.4.3 and reboot.
- Upgrade from 6.4.3 to 6.4.6 or 6.4.7 and reboot.
- Upgrade from 6.4.6/6.4.7 to 7.4.7 and reboot.
- Upgrade to 7.5.3 and reboot.
- Upgrading from a 6.x version after 6.4.3:
- Upgrade from appliance version to 6.4.6 or 6.4.7 and reboot.
- Upgrade from 6.4.6/6.4.7 to 7.4.7 and reboot.
- Upgrade to 7.5.5 and reboot.
Important Notes
- The upgrade from 6.4.3 may take longer than normal due to the database upgrade that takes place.
- v7.x will only accelerate with peers running 6.4.3 and later due to changes to the Exinda internal protocols. If you are installing v7.x into an x800 estate, the best approach is to upgrade your core box to 6.4.3 and then install v7 on one or more branch offices. This allows all the existing appliances to accelerate to the core appliance and allows the v7 appliances to accelerate to the core box running 6.4.3.
Summary of Changes
New:
- Application classification engine update with 86 new application signatures
- Support for the new Exinda 8065 hardware device
- UEFI Bios support
- LACP - New CLI switch added to avoid bandwidth splitting at the circuit level
Fixes:
Priyanka Bhotika
Comments