Articles

MS Readiness Assessment

• Exinda | Loopback has high packet count

  Summaryhigh rx and tx for loopback interface OverviewThe loopback interface on the Exinda Appliance can show high traffic. You can find it under System > Diagnostics > NIC. For example, the entry belo...

• License Is Not Showing Expiration Dates for a Particular Device

  Overview The license server, EBS (Exinda License Database), was not showing Expiry date fields on a particular Exinda device. The missing fields are needed to set entitlement on the Exinda. The missin...

• Exinda | Image upload takes too long

  SummaryFirmware Image upload takes a very long on Exinda OverviewExinda firmware upgrades involve the following steps: Firmware download (on Exinda or locally) Firmware upload to the Exinda (if downlo...

• Exinda | HTTP Redirect error too many redirects

  SummaryPage not loading with Exinda is trying to redirect HTTP request OverviewIf HTTP Redirect is not configured properly, the redirect fails.  The configured redirect URL page does not load and the ...

• Exinda | ExOS 7.4.8 Release Notes

  Description ExOS 7.4.8 Release NotesRelease Date: September 18, 2018 Software Update:Download the software update ExOS v7.4.8  Size:   696,005,554 bytes MD5 Hash: 744501b3f21ae51972eeb5dc82ac5368 Supp...

• Exinda | ExOS 7.4.7 Release Notes

  Description ExOS 7.4.7 Release Notes Release Date: May 24, 2018 Software Update: Download the software update ExOS v7.4.7 Size:   694,752,379 bytes MD5 Hash: fcedd1cd4d1a0c39c8a40f94cc8a8e4b Supported...

• Exinda | Edge Cache traffic not following bandwidth specifications

  SummaryEdge cache not following bandwidth Overview In ExOS version 7.4, traffic which falls into an Edge Cache policy but is not already cached will now follow the bandwidth settings for the policy. N...

• Exinda | 'show ntp' command does not show associated NTP servers in ExOS 7.0.3

  SummaryShow NTP command not showing NTP servers OverviewIn firmware versions 7.0.3 and 7.0.3 Update 1, running the show ntp command from the command line will show the following, whether NTP servers a...

• Exinda WebUI inaccessible, CLI is restricted and Errors: I/O Error, write failed (-28)

  OverviewThe following log messages mean that the device is running out of disk space. Hence it is unable to perform normally. Users might not be able to boot the firmware on the Exinda due to this as ...

• Exinda reboots unexpectedly - logs show Negotiate option is the wrong size

  OverviewNegotiate option is the wrong size' means that the Exinda saw a packet with tcp option 30 which makes it think is related to TCP acceleration. However when it tried to decode the packet, it fo...