Articles

ExOS Solution - Software - 6.4.x

• Changing the Next Boot Partition via CLI

  Overview This article provides relevant information to keep in mind when changing the next boot partition via CLI (command-line interface).   Information Changing the partition that is going to boot n...

• Changing Speed, Duplex or MTU of Exinda NIC via CLI

  Overview This article provides information that relates to the changes of speed, duplex, or MTU of an Exinda device via CLI (command-line interface).    Information Speed, duplex, or MTU (Maximum Tran...

• Changing Network Object Location Causing Page Timeouts with Squid Error while Edge Cache is Enabled

  SummaryWhen using an 'inherit' network object and sending traffic to an 'internal' network object, if the 'inherit' object is changed to 'internal' as well, internet pages requested by hosts in the ne...

• Certain Values Not Populated While Editing Existing Application Signature

    Overview Editing applications on the web UI (user interface) through Configuration > System > Objects brings up the already populated information of what is currently configured and gives the user t...

• Global QoS Does Work When Using Dynamic Virtual Circuits (DVCs) with Global Control for Link Aggregation Enabled | Log Error: 'Global QoS cannot be applied as there are Dynamic Virtual Circuits.'

  Overview When using Dynamic Virtual Circuits (DVCs), and enabling Global Control for Link Aggregation, Global QoS does work, and the following logging message may be found in the logs: Global QoS cann...

• Cannot configure the Exinda. Throws out error 1001, 1002 or 1003 on the command line

  SummaryError when trying to execute a cli command due to a corrupt config file in memory OverviewWhen user tries to execute a command in the cli mode, they get an internal error 1001 or 1002 or 1003 C...

• DSCP Marks for Routing Decisions in Exinda

  Overview Exinda appliances can use Differentiated Services Code Point (DSCP) markings or other network information to choose where to send traffic. This article provides relevant information on this m...

• Multiple Adaptive Responses Pointing to the Same Destination Object

  Overview This article addresses the possibility of having multiple Adaptative Responses pointing to the same Destination Object.    Information The idea behind the Exinda's Adaptive Response is to be ...

• Bridges Not Passing Traffic on New Installation

  Overview In new device installations, it is possible to see that even though the device is passing traffic when it is powered off, i.e., in bypass mode, when powering it on, traffic stops passing thro...

• When Blocking iMessage, Push Notifications Are Blocked

  Overview The Exinda appliance gives administrators multiple options to stop or throttle applications that can use a lot of bandwidth in the network. An application that many would consider discardable...