Articles

Traffic policies & Prioritization

• Prioritizing Traffic for a Single IP or a Subnet

  Overview To prioritize traffic to a specific host or subnet user has to define the host or subnet as a network object then create a policy based on that network object under the applicable Circuit (br...

• Exinda Best Practices for Optimizing P2P Traffic

  Overview P2P (Peer to Peer) traffic is generally undesirable. This article will go over the best practices that Exinda provides to control this traffic.     Information   Block P2P Create a policy for...

• Blocking Adult Content Sites on a Virtual Circuit

  Overview This article provides the steps required for you to block adult content (pornography) using the Exinda device. Prerequisites Admin access to the Exinda WebUI Admin Access to the Exinda CLI So...

• Assigning Bandwidth to a Domain

  Overview You need the steps to assign bandwidth to the domain.   Solution Assigning a bandwidth to a domain involves the following steps: Define your Domain as a Network Object as described in the art...

• Optimizer Does Not Start" "Error: Cannot ‘Show Policies’, Optimizer is not ON"

  Overview This article troubleshoots when the optimizer does not start and you are getting the message Error: Cannot ‘Show Policies’, Optimizer is not ON. Solution The optimizer will fail to start when...

• High Traffic in Ignored Policy is impacting Exinda performance

  Overview You have an Ignored Traffic Policy set up on your Exinda. However, you find that when the ignored policy traffic goes high, it seems to affect the livestream traffic on Exinda and you get tra...