Overview

This article provides information regarding the Exinda CLI command radius-server.

You can use the radius-server command to configure the Exinda appliance to authenticate user login attempts with a remote Radius server.

Information

NOTE: The following syntax convention is used:

{}: Options are enclosed in braces and are separated by '|'
[]: Optional keywords are enclosed in brackets
<>: User input is required where variables are enclosed in greater-than and less-than symbols

The following table describes the commands used for performing common actions related to radius-server:

Action Description	Command	Parameter Description
To specify the hostname or IP address of the Radius server	`radius-server host <hostname or IP address>`	host <hostname or IP address> - IPv4 addresses can be used.
To specify the key for accessing the Radius server	`radius-server key <key string>`	Not Applicable
To specify how often authentication requests should be retransmitted to the Radius server	`radius-server retransmit <retries>`	retransmit <retries> - Specify how many retries should be attempted
To specify how many seconds before the connection to the Radius server times out	`radius-server timeout <seconds>`	Not Applicable