Overview

This article provides information regarding the Exinda CLI command acceleration smb which is used to configure SMB (Server Message Block) acceleration settings.

Information

NOTE: The following syntax convention is used:

{}: Options are enclosed in braces and are separated by '|'
[]: Optional keywords are enclosed in brackets
<>: User input is required where variables are enclosed in greater-than and less-than symbols

The following table describes the commands used for performing common actions related to acceleration smb:

Action Description	Command	Parameter Description
Configuring Adaptive Response Settings
To enable or disable SMB acceleration	`[no] acceleration smb enable`	Not Applicable
To add applications supported by the SMB module	`[no] acceleration smb application <application>`	Not Applicable
To clear the SMB disk cache	`acceleration smb cache clear`	Not Applicable
SMB1 Commands
To enable or disable SMB1 acceleration	`[no] acceleration smb v1 enable`	Not Applicable
To enable or disable SMB1 meta-caching	`[no] acceleration smb v1 meta-cache`	Not Applicable
To set the amount to pre-fetch	`acceleration smb v1 prefetch <prefetch-kbytes>`	prefetch <prefetch-kbytes> - Value in kbytes must be between 0 and 8192.
To enable or disable SMB1 read-ahead	`[no] acceleration smb v1 read-ahead`	Not Applicable
To enable or disable SMB1 write-behind	`[no] acceleration smb v1 write-behind`	Not Applicable
To enable or disable SMB1 signing	`[no] acceleration smb v1 signing enable`	Not Applicable
SMB2 Commands
To enable or disable SMB2 acceleration	`[no] acceleration smb v2 enable`	Not Applicable
To enable or disable SMB2 signing	`[no] acceleration smb v2 signing enable`	Not Applicable
Viewing Acceleration Settings
To list the applications that support SMB	`show acceleration smb applications`	Not Applicable
To list the SMB signed servers	`show acceleration smb signed-servers`	Not Applicable
To display the configuration for SMB1	`show acceleration smb v1 config`	Not Applicable
To display the SMB1 connections	`show acceleration smb v1 connections [list [detailed]]`	smb v1 connections - Display the connections. smb v1 connections list - Display the connections with sources and destinations of the connections. smb v1 connections list detailed - Display the connections, the sources and destinations of the connection, and the client/server operating systems and shared file directories.
To display the configuration for SMB2	`show acceleration smb v2 config`	Not Applicable
To display the SMB2 connections	`show acceleration smb v2 connections [list]`	smb v2 connections - Display the connections. smb v2 connections list - Display the connections with sources and destinations of the connections.

Find more CLI commands.

Articles in this section

Exinda CLI: SMB Acceleration

Overview

Information