Overview

This article provides information regarding the Exinda CLI command wccp.

You can use the wccp command to configure WCCP (Web Cache Communication Protocol) on the appliance. WCCP allows for out-of-path application acceleration.

Information

NOTE: The following syntax convention is used:

{}: Options are enclosed in braces and are separated by '|'
[]: Optional keywords are enclosed in brackets
<>: User input is required where variables are enclosed in greater-than and less-than symbols

The following list describes the commands used for performing common actions related to wccp:

Action Description	Command	Parameter Description
To assign an interface to use for WCCPv2 traffic	`wccp interface <interface>`	Not Available
To configure WCCP services	`wccp service <service group (1-99)> {assignment\|group-address\|password\|router}`	assignment {HASH\|MASK} - Set the assignment type of the service group group-address <multicast-address> - configure the multicast address for sending WCCPv2 messages to password <password (1-8 characters)> - Configure the password used by the service group router <address> - Configure the routers in the service group

Find more CLI commands.

Articles in this section

Exinda CLI: WCCP

Overview

Information