Workaround
Exinda 6063
The 6063 is the Dell R320 platform. It has two slots, a half height slot (#1) and a full height slot (#2).The slots are empty unless otherwise referred by the P.O.
If the system is ordered with two additional cards, then one of those cards must be capable of being installed in the half height slot.
The following cards are available to be installed in the full height slot:
EX-NEM63-G6BP | PE2G6BPI35-SD | 6 port RJ45 card. Full Height slot. |
EX-NEM62-G4BP | PE2G4BPI80L-SD-R | 4 port RJ45 card. Available in half height and full height configuration |
EX-NEM60-G2BP | PEG2BPI6-SD | 2 port RJ45. Full and half height configuration |
EX-NEM63-G2BP-LP | PE2G2BPI35A-SD | 2 port RJ45. Full and half height configuration |
EX-NEM60-G4BPFi-LX | PEG4BPFi5-LX-SD | 4 port fibre, single mode / long range. Full height |
EX-NEM60-G4BPFi | PEG4BPFi5-SD | 4 port fibre, multi-mode/ short range, full height |
EX-NEM63-G4BPFi-LX | PE2G4BPFi35A-LX-SD | 4 port fiber, single mode / long range. Full height |
EX-NEM63-G4BPFi | PE2G4BPFi35A-SD | 4 port fiber, multi-mode/ short range, full height |
EX-NEM60-10G2BPi9-SR | PE210G2BPi9-SR-SD | 2 port 10G fibre card. Multi-mode/short range |
EX-NEM60-10G2BPi9-LR | PE210GBPi9-LR-SD | 2 port 10G fibre card. Single mode/long range |
EX-NEM60-G2BP | PEG2BPI6-SD | 2 port RJ45. Full and half height configuration |
EX-NEM63-G2BP |
PE2G2BPI35A-SD |
2 port RJ45. Full and half height configuration |
EX-NEM62-G4BP | PE2G4BPI80L-SD-R | 4 port RJ45 card. Available in half height and full height configuration |
EX-NEM60-10G2BPi9 | PE210G2BPi40-T-SD | 2 port 10G RJ45. Full and half height capable |
EX-NEM63-G2BPFi-LX |
PE2G2BPFI35-LX-SD |
2 port fibre, single mode / long range. Full height and half height |
EX-NEM63-G2BPFi |
PE2G2BPFI35-SD |
2 port fibre, multi-mode/ short range, full height and half height |
Exinda 12063
The 12063 is the Dell R730. It has three half-height slots (#1, #2, #3) and 4 full-height slots (#4, #5, #6 and #7). However, slot 6b is not available.The slots are empty unless otherwise referred by the P.O.
If the order contains multiple 10G Cards, connect the first one on slot #4, the second one on slot #5. If more 10G cards are being purchased, the next slots that need to be used in order are #7 and #6 respectively.
If the order contains multiple 1G full-height cards, connect slot #6 first and then use slot #7. If more 1G cards (full height) are being purchased, the next slots that need to be used in order are #5 and #4 respectively.
If the order contains multiple 1G low-profile cards, connect slot #2 first and then slot #3 and finally slot#1.
The following cards are available to be installed in the full height slot:
EX-NEM63-G6BP | PE2G6BPI35-SD | 6 port RJ45 card. Full Height slot. |
EX-NEM60-G4BPFi-LX | PEG4BPFi5-LX-SD | 4 port fibre, single mode / long range. Full height |
EX-NEM60-G4BPFi | PEG4BPFi5-SD | 4 port fibre, multi-mode/ short range, full height |
EX-NEM63-G4BPFi-LX | PE2G4BPFi35A-LX-SD | 4 port fibre, single mode / long range. Full height |
EX-NEM63-G4BPFi | PE2G4BPFi35A-SD | 4 port fibre, multi-mode/ short range, full height |
EX-NEM60-10G2BPi9-SR | PE210G2BPi9-SR-SD | 2 port 10G fibre card. Multi-mode/short range |
EX-NEM60-10G2BPi9-LR | PE210GBPi9-LR-SD | 2 port 10G fibre card. Single mode/long range |
EX-NEM62-10G2BPi-C | PE210G2BPi40-T-SD | Copper Ethernet 2-port 10Gbps bypass |